Handlebars
316 Stainless Steel Polished Handlebars
These handlebars are the Highest quality bars available. 316 Stainless steel is a marine grade material that will stand up to any conditions you could possibly throw at it. They are polished to a mirror finish and will always look that way. Available: 1" or 7/8" bars
Straight Bars - $40.00
Drag Bars - $80.00
Clubman Bars - $199.99
Clip-ons - $199.99
Power Coated stainless Handlebars
These handle bars are constructed from stainless steel. They are powder coated any color you wish. Powder coat is a very durable coating that will last for many years.Straight Bars - $55.00
Drag Bars - $ 100.00
Clubam Bars - $210.00
Clip-ons - $210.00
*Internal Wiring
Add $45 for machining
Windscreen Fairings
Check out our low profile windscreen fairings. They're hand formed to your bike. made from high quality aluminum, and formed in an english wheel. Dont put a plastic junk screen fairing on you bike- Bolted or welded to our custom headlight ears
- Polished or brushed finish
- vintage race bike aerodynamics
These Windscreen Fairings work with a center mounted, single gauge 
Seat Pans & Rear Fairings
Single Gauge mounting Bracket
Single Gauge mount. Made custom for your application, different styles to choose from. 1/8" Aluminum
Headlight Ears
License Plate Frames
Total Length 24"
24"Sitting area 15"
15"width @ seat curve9"
9"width @ front7.5"
7.5"Finish: Polished Aluminum
Call for more details
Total Length - 27"
Sitting area - 17"
Widest Point - 9.5"
Height - 6"
Finish: Polished / Upholstered
Total Length - 27"
Sitting area - 17"
Widest Point - 8.875"
Height - 5.5"
Aluminum Cafe Racer Seat, Polished finish super light weight looks excellent on the bike very comfortable shape
Finish: Polished
Racer Style seat. Bucket Racer, Vintage Racer
Finish: polished / Upholstered
Total Length - 22.25"
Sitting Area - 15.5"
Widest Point - 9"
Height - 6.5"
Finish: Brushed aluminum
Factory bolt up Cafe seat for 60's Honda CB160- Factory seat mounting points
- All aluminum construction
- Powder Coated and Upholstered
- Flush mounted round LED Taillight
1973-76 CB750K Direct Bolt up, Cafe Racer Seat
- factory hinge & latch mounting points
- keep your factory taillight, blinkers & Fender
- Curves on this seat line up with factory curves of your fender
- 1 minute install, with no modification - and you have a cafe racer for the weekend
- powder coated and upholstered
Modified Factory Seat pan.
-opens and closed like the factory seat-works well for bikes with factory fairings-I use this on what I call a lightly modified cafe racer
Strong & light weight Aluminum headlight ears. Put your headlight anywhere you want it: further out, closer in, up or down a little. Wherever its going to look best on your project. Tons of styles and patterns to choose from. Great addition to your Cafe Racer. Fits 33mm or 35mm fork tubes, will never rust.
Finish: Polished / brushed / Powder coated
We make many styles, here are just a few examples.
- Aluminum, Stainless, or steel
- Polished / Brushed / powder coated\
- any shape or style
Rear Sets
Custom Built Rear Sets for any application
Side Covers
These side covers clip into the original mounts. We build them from aluminum, stainless or steel. Many styles to choose from
Hand crafted aluminum parts for your Cafe Racer. Just about everything we build is one of a kind, formed by hand to fit your bike the way you think it should. If you like something you see here, or have a design in mind, we will build which ever it is. These parts are made mostly from 6061 and 1100 series aluminum, 16 gauge thick. Our parts are fully TIG welded, shaped with a beating bag, plannishing hammer and an English wheel. This is how it was done when cafe racers were born, so don't settle for a fiberglass knock off
Norton "Manx" Style Alloy Tank
Hand Formed Aluminum Cafe Racer Parts
